3Brothers RC – G11 350oz Direct-powered Servo

Our NEW! G11 direct-power servo with all hardened steel gears. A strong 350oz at .11 transit speed, our new G11 servo is a perfect upgrade for your stock crawler, such as Axial Capra, SCX10.2, TRX4, TRX6, Gen 8, and Element. You do not need a BEC with this servo because it runs directly off of your battery, from 2s to 4s lipo. Uses all-metal gears and is compatible with the G13 and G12 gear set, which makes for an easy upgrade or replacement. PA66+45 composite/aluminum case for durability and heat sink. These servos operate under water, as a high-level water-resistant coating is applied before assembly. Takes a 25T servo horn. Recommended for stock scale crawlers, not recommended for bombers or bashers. Pair with our no-solder or direct-power connectors for a clean, simple installation solution. Technical Specifications: *Dead band: 2μs 1520μs/330hz *Operating speed(11.1v): 0.13sec/60° *Operating speed(14.8v): 0.11sec/60° *Stall Torque (11.1v) 290oz/in *Stall Torque (14.8v) 350oz/in *Dimensions: 40.5×20.2×40.3 *Weight: 62g (2.19oz) *Spline count: 25T Note: JST solder-on connector included; no-solder connectors available separately. No-solder connectors are for use only with single-battery applications; DO NOT USE with multiple-battery setup. Note: the servo power wire has to be unplugged when not in use. We recommend routing the power wire from the servo to the battery, so that when you unplug the battery, you unplug the servo as well.